Swimmingpool-Light made V4A-stainless steel 316L

4.0282

description

New installation with installation housing

· Spotlight, entirely made of V4A stainless steel 1.4571 EPOL

· Protection class IP68 – Water depth 5 m

· Round attachment cover, V4A stainless steel, (H2 mm, ø 240 mm)

· with POW-LED 24 x 3 W 700 mA/12 V-DC, coldwhite (6.000 K), neutralwhite (4.500 K), warmwhite (3.000 K), royalblue

· with 15 Multichip POW-LED RGB (3 x 3W) 45 x 3 W 700 mA/12 V-DC

· POW-LED-Platine temperature control (onboard)

· light distribution especially for swimming pool lighting „Multiflux“

· Supplied with lamp and 3 m cable

· Constant-current power source/RGB controller external

· installation housing, depending on the installation situation must be ordered separately

application

- For lighting medium and large swimming pools (up to approx. 25 x 15 m), water attractions, fountains installed in the wall or floor. Use with freshwater, chlorinated pool water and sea water.

references

· Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected and cast to the connection box without opening the spotlight. Always observe the separate manual instructions. UW cable 9.6150.02.40 (with POW LED monochrome, single colour ), 9.6150.06.40 (with POW LED RGB) and sealing compound 9.9011.00.25 have to be ordered separately.

· Suitable for pools with lifting floors or installation in the floor (height of the spotlight totals 2 mm)

options on request

· POW-LED with beam angle spot 10°, medium 30°, medium flood 45°, flood 90° and elliptical 15x40°

· POW-LED monochrome, single colour in green, red, amber, turquoise

· Power supply pack/RGB controller in IP65 protective housing with 1 in/1 out on request. (5.0670.65.72)

VERSIONS

	Article number	Lamps	Light colour	Wattage (TLF)	Tension	Radation angle	UW-Cable, installs
	Only underwater operation
	New installation in combination with installation housing
	Round attachment cover 2 mm, 3 m UW cable mounted and cast
	4.0282.00.11	POW-LED cold white	6.000K	24 x 3 W (230 lm/LED = total 5520 lm )	700 mA/12 V DC	30°-120° Multiflux	(2x4,0 qmm)
	4.0282.00.12	POW-LED warm white	3.000K	24 x 3 W (190 lm/LED = total 4560 lm)	700 mA/12 V DC	30°-120° Multiflux	(2x4,0 qmm)
	4.0282.00.13	POW-LED neutral white	4.500K	24 x 3 W (215 lm/LED = total 5160 lm)	700 mA/12 V DC	30°-120° Multiflux	(2x4,0 qmm)
	4.0282.00.16	POW-LED royal blue	460nm	24 x 3 W (650 mW/LED )	700 mA/12 V DC	30°-120° Multiflux	(2x4,0 qmm)
	4.0282.00.19	15 Multichip POW-LED RGB (3x3 W)		45 x 3 W	700 mA/12 V DC	30°-120° Multiflux	(2x4,0 + 4x0,5 qmm)
	installation housing
	4.0282.01.00	made of V4A stainless steel with 1.5 m protective cable tube and M20 plastic terminating connection, for installation in concrete pools with tile covering
	4.0282.02.00	made of V4A stainless steel with 1.5m protective cable tube and M20 plastic terminating connection, for installation in thin-walled pools and foil lined pools (pressure flange ø 244 mm)
	4.0282.03.00	made of V4A stainless steel with 1.5 m protective cable tube and M20 plastic terminating connection, for installation in pools with adhesive/foil coating (adhesive flange ø 350 mm)
	4.0282.04.00	made of V4A stainless steel with 1.5 m protective cable tube and M20 plastic terminating connection, for welding into stainless steel pools